Benjamin Moore Ultra Spec Interior Latex Paint - Premium Matte Finish for Walls & Ceilings - Perfect for Living Rooms, Bedrooms & Home Offices

Product Description

*Free Shipping*

*A represetative will reach out to confirm color*

Benjamin Moore® Ultra Spec® 500 is a professional contractor quality interior coating designed with Benjamin Moore® proprietary acrylic resin that tints on the Gennex® zero VOC colorant system. Benjamin Moore® Ultra Spec® 500 meets the needs of professional painting contractors, facility managers, and property managers. Available in a wide range of sheens and unlimited colors, professionals will appreciate its excellent hiding and touchup properties, good flow and leveling, easy application, and soap-and-water cleanup.  Because this product tints on the Gennex® waterborne colorant system, all Ultra Spec® 500 finishes are available in any color without an increase in VOC.

Benjamin Moore® Ultra Spec® Interior Latex Paint features: 

• Excellent hiding
• Spatter resistant
• Great touch-up properties
• Decorative and uniform flat finish
• Soap-and-water cleanup
• Zero VOCs
• Qualifies for LEED credit
• Washable
• Quick drying
• Low odor
• Easy application
• Superior flow and leveling
• MPI approved

Recommended for:

• FLAT N536: Low abuse interior wall and ceiling surfaces in commercial and institutional environments where flat finish is desired. For new or previously painted interior wallboard, masonry, and primed or previously painted plaster, wood or metal.
• LOW SHEEN N536: Interior wall and ceiling surfaces in commercial and institutional environments where a washable low sheen finish is desired. For use on primed or previously painted drywall, plaster, wood, metal and wallpapered surfaces. 
• EGGSHELL N538: Interior wall and ceiling surfaces in commercial and institutional environments where an eggshell finish is desired. For use on primed or previously painted drywall, masonry, plaster, wood, metal and wallpapered surfaces.
• SEMI GLOSS N539: Interior door, trim, cabinet, wall and ceiling surfaces in commercial and institutional environments where a washable semi-gloss finish is desired. For use on primed or previously painted drywall, plaster, wood, masonry, metal and wallpapered surfaces.
• GLOSS N540: Interior door, trim, cabinet, wall and ceiling surfaces in commercial and institutional environments where a washable gloss finish is desired. For use on primed or previously painted drywall, plaster, wood, metal and wallpapered surfaces

Coverage: 350-400 sq.ft./gal

Dry Times @ 77 degrees:

• FLAT N536
• To touch: 1 hour
• Recoat: 2-3 hours
• LOW SHEEN N537
• To touch: 2 hours
• Recoat: 2-3 hours
• EGGSHELL N538
• To touch: 2 hours
• Recoat: 2-3 hours
• SEMI GLOSS N539
• To touch: 2 hours
• Recoat: 4 hours
• GLOSS N540
• To touch: 2 hours
• Recoat: 4 hours

Surface Preparation: Surfaces to be painted must be clean, dry, and free of dirt, dust, grease, oil, soap, wax, scaling paint, water soluble materials, and mildew. Remove any peeling or scaling paint and sand these areas to feather edges smooth with adjacent surfaces. Glossy areas should be dulled. Drywall surfaces must be free of sanding dust. New plaster or masonry surfaces must be allowed to cure 30 days before applying base coat. Cured plaster should be hard, have a slight sheen and maximum PH of 10; soft, porous or powdery plaster indicates improper cure. Never sand a plaster surface; knife off any protrusions and prime plaster before and after applying patching compound. Poured or pre-cast concrete with a very smooth surface should be etched or abraded to promote adhesion, after removing all form release agents and curing compounds. Remove any powder or loose particles before priming. Wood substrates must be thoroughly dry. 

Application: Stir thoroughly before use. Apply one or two coats. For best results, use a premium nylon/polyester brush and/or a premium 3/8" microfiber or woven roller. This product can also be sprayed.