Benjamin Moore Ultra Spec HP DTM Acrylic Paint - High Performance Interior & Exterior Paint for Walls, Trim & Doors - Perfect for Homes, Offices & Commercial Spaces

Product Description

• Direct to metal application
  
• Improved gloss and color retention
• Easy application
• Provides superior rust inhibition and control
• Primer and finish coat
• Fast dry
• Excellent adhesion
• MPI: 114, 154, 164
• Engineered with 

Recommended For: General maintenance interior or exterior surfaces, Ferrous or non-ferrous metal, doors, railings, steel, wood, roof decks, equipment, fencing. This product is very popular for industrial or commercial properties. 

Coverage: 320 sq.ft./gal

Dry Times:

• To touch: 1 hour
• Recoat: 4 hours

More Information: 

• Available Colors: All Colors, An assortment of Ready Mixed Whites
• Sheen (or Gloss): Eggshell
• Cleanup: Soap and Water
• Resin Type: Acrylic Blended Latex
• Recommended Use: Interior
• MPI Rating: 44
• VOC Level: 144.0

Primer/Finish Systems: 

Ultra Spec® HP DTM Acrylic is self-priming on properly prepared ferrous and non-ferrous metal substrates. New surfaces should be fully primed, and previously painted surfaces may be primed or spot primed as necessary.

Ferrous Metal Surfaces (Iron & Steel): Finish: 2 coats Ultra Spec® HP DTM Acrylic Non-Ferrous Metal (Galvanized & Aluminum): All new non-ferrous metal surfaces must be thoroughly cleaned with an Oil & Grease Emulsifier Corotech® V600 to remove contaminants. Finish: 1 or 2 coats Ultra Spec® HP DTM Acrylic

Masonry, Smooth Poured or Precast Concrete: Primer: Ultra Spec® Masonry Interior / Exterior 100% Acrylic Masonry Sealer (608) Finish: 1 or 2 coats Ultra Spec® HP DTM Acrylic

Masonry, Rough or Pitted: Primer: Ultra Spec® Masonry Interior/Exterior Hi-Build Block Filler (571) Finish: 1 or 2 coats Ultra Spec® HP DTM Acrylic

Plaster and Wallboard: All plaster surfaces must be thoroughly cured for at least 30 days. Drywall surfaces must be free of sanding dust. Primer: Fresh Start® Multi-Purpose Latex Primer (N023) Finish: 1 or 2 coats Ultra Spec® HP DTM Acrylic

Wood, and engineered wood products: Primer: Fresh Start® Multi-Purpose Latex Primer (N023) Finish: 1 or 2 coats Ultra Spec® HP DTM Acrylic

Bleeding Type Woods, (Redwood and Cedar): Primer: Fresh Start® Multi-Purpose Oil Based Primer (024) or 1-2 coats of Fresh Start® High-Hiding All Purpose Primer (046) may be used Finish: 1 or 2 coats Ultra Spec® HP DTM Acrylic

Application: 

Mixing of Paint: Stir thoroughly before and occasionally during use.A one-coat application protects and preserves; two coats provides greater durability. Apply with an all-purpose synthetic brush, short nap roller, or spray. Spray, Airless: Fluid Pressure — 1,500 to 2,500 PSI; .013 - .017 Orifice