Benjamin Moore Eco Spec Interior Latex Paint - Low VOC, Premium Quality Matte Finish for Walls & Ceilings - Perfect for Living Rooms, Bedrooms & Home Offices

Product Description

*Free Shipping* 

Benjamin Moore® Eco spec® Interior Latex is a low odor, zero VOC, 100% acrylic  spatter resistant properties. Ideally suited for commercial, facility management, and residential applications. Eco Spec® WB Interior Latex Primer does not have the odor of conventional primers which contain ingredients known as VOC’s. 

Features Of: Benjamin Moore® Eco spec® Interior Latex Paint

• Stain release technology that is easy to clean with less scrubbing
• Minimal Odor
• Zero VOCs
• Quick return to service
• Excellent hide and coverage for a uniform finish
• 100% Acrylic
• Spatter-resistant
• Exhibits excellent holdout properties
• Mildew resistant

Recommended for: 

• Use in Hospitals, schools, and commercial areas where zero VOC and no odor is required. A good comparable product to Benjamin Moore® Natura at a lower cost. For use on primed or previously painted drywall, masonry, plaster, wood, metal and wallpapered surfaces. If a Low Odor solvent free primer/finish system is desired, Use Eco Spec® Interior Latex Primer. 

Coverage: 400-450 sq.ft./gal

Dry Times:

• To touch: 1 hour
• Recoat: 1-2 hours

More Information 

• Available Colors: All Colors, Ready Mixed White
• Sheen (or Gloss): Eggshell
• Cleanup: Soap and Water
• Resin Type: 100% Acrylic Latex
• Recommended Use: Interior
• MPI Rating: 52, 52 X-Green, 139, 139 X-Green
• VOC Level: 0.0

Primer/Finish Systems:

Wood, and engineered wood products: Primer: Eco Spec® Interior Latex Primer or Fresh Start® AllPurpose Alkyd Primer. Finish: 1 or 2 coats Eco spec® Interior Latex Paint

Bleeding Woods; like Redwood or Cedar: Primer: Fresh Start® Multi-Purpose Oil Based Primer (024) or Fresh Start® High-Hiding All Purpose Primer. Finish: 1 or 2 coats Eco spec® Interior Latex Paint

Drywall: Primer: Eco Spec® Interior Latex Primer or Fresh Start® HighHiding All Purpose Primer. Finish: 1 or 2 coats Eco spec® Interior Latex Paint

Cured Plaster: Primer: Eco Spec® Interior Latex Primer (N372) or Fresh Start® HighHiding All Purpose Primer. Finish: 1 or 2 coats Eco spec® Interior Latex Paint

Rough or Pitted Masonry: Primer: Ultra Spec® Masonry Interior/Exterior Hi-Build Block Filler. Finish: 1 or 2 coats Eco spec® Interior Latex Paint

Smooth Poured or Pre-cast Concrete: Primer: Ultra Spec® Masonry Interior / Exterior 100% Acrylic Masonry Sealer or Fresh Start® Multi-Purpose Latex Primer. Finish: 1 or 2 coats Eco spec® Interior Latex Paint

Ferrous Metal (Steel and Iron): Primer: Ultra Spec® HP Acrylic Metal Primer or Super Spec HP® Alkyd Metal Primer. Finish: 1 or 2 coats Eco spec® Interior Latex Paint

Non-Ferrous Metal (Galvanized & Aluminum): All new metal surfaces must be thoroughly cleaned with Corotech® Oil & Grease Emulsifier to remove dirt. New shiny nonferrous metal surfaces that will be subject to abrasion should be dulled with very fine sandpaper or steel wool pad to help adhesion. Primer: Ultra Spec® HP Acrylic Metal Primer. Finish: 1 or 2 coats Eco spec® Interior Latex Paint

Application:

Stir thoroughly before and during use. Apply one or two coats. Eco Spec® dries faster than other acrylic paints, so avoid lap marks by maintaining a wet edge. This product can also be sprayed: Airless Pressure: 1500 -2500 psi Tip: .013 - .017